INSPECT DOOR MIRROR FOOT LIGHT

Disconnect the connector from the door mirror foot light.

Measure the voltage according to the value(s) in the tables below.

• Standard voltage:
• LH Side (Without Seat Position Memory):

• Tester Connection	Condition	Specified Condition
  M11-2 (+) - M11-8 (-)	Doors are unlocked by the transmitter	10 to 14 V
  M11-2 (+) - M11-8 (-)	All doors are locked	Below 1 V

• LH Side (With Seat Position Memory):

• Tester Connection	Condition	Specified Condition
  M15-2 (+) - M15-8 (-)	Doors are unlocked by the transmitter	10 to 14 V
  M15-2 (+) - M15-8 (-)	All doors are locked	Below 1 V

• RH Side (Without Seat Position Memory):

• Tester Connection	Condition	Specified Condition
  L12-2 (+) - L12-8 (-)	Doors are unlocked by the transmitter	10 to 14 V
  L12-2 (+) - L12-8 (-)	All doors are locked	Below 1 V

• RH Side (With Seat Position Memory):

• Tester Connection	Condition	Specified Condition
  L14-2 (+) - L14-8 (-)	Doors are unlocked by the transmitter	10 to 14 V
  L14-2 (+) - L14-8 (-)	All doors are locked	Below 1 V

If the result is not as specified, repair or replace the wire harness or connector.

Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 8.

Check that the door mirror foot light comes on.

• OK:
• Comes on

If the result is not as specified, replace the door mirror assembly.