INSPECT CONSOLE BOX LIGHT

Remove the console box light.

Measure the voltage according to the value(s) in the table below.

• Standard voltage:

• Tester Connection	Condition	Specified Condition
  J46-2 - J46-1	Console box is opened	10 to 14 V
  J46-2 - J46-1	Console box is closed	Below 1 V

If the result is not as specified, repair or replace the wire harness or connector.

Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.

Check that the console box light comes on.

• OK:
• Comes on

If the result is not as specified, replace the console box light.