Lexus IS250 IS220d GSE20 ALE20 - PARK ASSIST / MONITORING


CLEARANCE SONAR SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING

  • HINT:
Use these procedures to troubleshoot the clearance sonar system.
*: Use the intelligent tester.

1.VEHICLE BROUGHT TO WORKSHOP
NEXT
2.CUSTOMER PROBLEM ANALYSIS

Refer to how to proceed with troubleshooting .

NEXT
3.CHECK AND CLEAR DTC*

Refer to the DTC check/clear .

NEXT
4.CHECK INITIAL CHECK FUNCTION

Refer to operation check .

  • Result:
  • ResultProceed to
    Symptom does not occurA
    Symptom occursB
B.
Go to step 6
A
5.SYMPTOM SIMULATION

Refer to how to proceed with troubleshooting .

NEXT
6.CHECK MULTIPLEX COMMUNICATION SYSTEM*

Refer to how to proceed with troubleshooting .

  • HINT:
  • This ECU is connected to the multiplex communication system. Therefore, be sure to check that there are no problems in the multiplex communication system before performing troubleshooting.
NEXT
7.CHECK CAN COMMUNICATION SYSTEM*

Refer to how to proceed with troubleshooting .

  • HINT:
  • This ECU is connected to the CAN communication system. Therefore, be sure to check that there are no problems in the CAN communication system before performing troubleshooting.
NEXT
8.DTC CHECK*

*: Refer to the DTC check/clear .

  • Result:
  • ResultProceed to
    DTC is outputA
    DTC is not outputB
B.
Go to step 10
A
9.DTC CHART

Refer to the diagnostic trouble code chart .

NEXT
Go to step 11
10.PROBLEM SYMPTOMS TABLE

Refer to the problem symptoms table ().

NEXT
11.CIRCUIT INSPECTION
NEXT
12.IDENTIFICATION OF PROBLEM
NEXT
13.REPAIR OR REPLACE
NEXT
14.CONFIRMATION TEST
NEXT
END
LEXUS IS250, IS220d / GSE20 ALE20
PARK ASSIST / MONITORING
Lexus IS250 IS220d GSE20 ALE20
CLEARANCE SONAR SYSTEM