Lexus IS250 IS220d GSE20 ALE20 - PARK ASSIST / MONITORING

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK MULTIPLEX COMMUNICATION SYSTEM

READ VALUE OF INTELLIGENT TESTER

PERFORM SATELLITE SWITCH

REPLACE CLEARANCE WARNING ECU ASSEMBLY

CHECK OPERATION CLEARANCE SONAR SYSTEM

CLEARANCE SONAR SYSTEM - Clearance Sonar Main Switch Circuit

for Preparation Click here

DESCRIPTION

The clearance sonar main switch is installed on the instrument panel safety pad assembly.


When the clearance sonar main switch in turned ON, an ON signal is sent to the clearance warning ECU through the BEAN line. The clearance sonar system operates according to this signal.


WIRING DIAGRAM

Clearance Sonar System - Clearance Sonar Main Switch Circuit. PARK ASSIST / MONITORING. Lexus IS250 IS220d GSE20 ALE20

INSPECTION PROCEDURE

1.CHECK MULTIPLEX COMMUNICATION SYSTEM

Refer to how to proceed with troubleshooting .


If the multiplex communication system is operating normally, proceed to the next step.


NEXT
2.READ VALUE OF INTELLIGENT TESTER

Connect the intelligent tester to the DLC3.

Turn the engine switch ON (IG).

Turn the intelligent tester main switch ON.

Turn the clearance sonar main switch ON.

Select the item below in the Data List, and read its value displayed on the intelligent tester to check the clearance sonar main switch.

  • Result:
  • Clearance warning ECU:
    ItemMeasurement / Range (Display)Normal ConditionDiagnostic Note
    MAIN SWClearance sonar main switch / OFF or ONOFF: Clearance sonar main switch OFF
    ON: Clearance sonar main switch ON
    -
OK
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
NG
3.PERFORM SATELLITE SWITCH

Check operation speed and tach indicator system .

  • Result:
  • ResultProceed to
    The system operates normallyOK
    The system does not operate normallyNG
NG
GO TO COMBINATION METER SYSTEM
OK
4.REPLACE CLEARANCE WARNING ECU ASSEMBLY

Replace the clearance warning ECU .

NEXT
5.CHECK OPERATION CLEARANCE SONAR SYSTEM

Check the operation of the clearance sonar system .

  • Result:
  • ResultProceed to
    The system operates normallyOK
    The system does not operate normallyNG
NG
REPLACE COMBINATION METER ASSEMBLY
OK
END