REMOVE RADIATOR ASSEMBLY

REMOVE V-RIBBED BELT

REMOVE CRANKSHAFT PULLEY

REMOVE TIMING CHAIN CASE OIL SEAL

While releasing the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.

While turning the belt tensioner counterclockwise, align with its holes, and then insert the 5 mm bi-hexagon wrench into the holes to fix the belt tensioner.

Using SST, loosen the pulley bolt.

• SST
• 09950-50013(09951-05010,09952-05010,09953-05020,09954-05021)

Tighten the pulley bolt to 2 or 3 threads of the crankshaft.

Using SST, remove the pulley bolt and pulley.

• SST
• 09213-70011(09213-70020)
  09330-00021

• HINT:

• Apply grease to the threads and tip of the SST (center bolt) prior to use.

Remove the pulley set key of the key groove.

Using a screwdriver with its tip taped, pry out the oil seal.

• HINT:

• Tape the screwdriver tip before use.

• NOTICE:

• After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.