REMOVE COOL AIR INTAKE DUCT SEAL

REMOVE NO. 1 INLET AIR CLEANER

REMOVE V-BANK COVER SUB-ASSEMBLY

REMOVE V-RIBBED BELT

Remove the 11 clips and intake duct seal.

Remove the bolt, clip and inlet air cleaner.

Raise the V-bank cover to disengage the clip on the rear of the cover. Raise the cover again to disengage the 2 clips on the front of the cover and remove the cover.

• NOTICE:

• Attempting to disengage both front and rear clips at the same time may cause the cover to break.

While releasing the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.

While turning the belt tensioner counterclockwise, align with its holes, and then insert the 5 mm bi-hexagon wrench into the holes to fix the belt tensioner.