Lexus IS250 IS220d GSE20 ALE20 4GR-FSE ENGINE CONTROL SYSTEM
CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC U0101)
DTC U0101 Lost Communication with TCM
DESCRIPTION
The engine control unit and the transmission control unit are located inside the ECM. The engine control unit intercommunicates with the transmission control ECU with the Controller Area Network (CAN).
If there is a problem in this intercommunication, the ECM sets a DTC.
| DTC No. | DTC Detection Condition | Trouble Area |
| U0101 | Following conditions are met for 2 seconds (1 trip detection logic): Engine switch on (IG) Battery voltage is 10.5 V or more No intercommunication between engine control ECU and transmission control ECU | ECM |
INSPECTION PROCEDURE
| 1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC U0101) |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the tester ON.
Enter the following menus: Powertrain / Engine / DTC.
Read DTCs.
- Result:
Display (DTC output) Proceed to U0101 A U0101 and other DTCs B
|
| ||||
| A | ||
| ||
LEXUS IS250, IS220d / GSE20 ALE20