INSPECT FUEL PUMP RELAY (Marking: F/PMP)

Remove the No. 2 relay block cover.

Remove the fuel pump from the engine room No. 2 junction block.

Measure the fuel pump relay resistance.

• Standard resistance:

• Tester Condition	Specified Condition
  1 - 2	63 to 91 Ω
  3 - 5	Blow 1 Ω
  3 - 5	Below 10 kΩ or higher (when battery voltage is applied to terminals 1 and 2)

Reinstall the fuel pump relay to the engine room No. 2 relay block.

Reinstall the No. 2 junction block cover.