INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

Measure the resistance between the terminals.

• Standard resistance:
• 6.9 to 7.9 Ω at 20°C (68°F)

If the result is not as specified, replace the oil control valve.

Connect the battery's positive (+) lead to terminal 1 and negative (-) lead to terminal 2, and check the movement of the valve.

• OK:

• Condition	Specified Condition
  Battery positive (+) voltage is applied	Valve moves in left arrow direction shown in illustration
  Battery positive (+) voltage is cut off	Valve moves in right arrow direction shown in illustration

If the result is not as specified, replace the oil control valve.

• NOTICE:

• If the valve cannot return properly because of foreign matter, a small pressure leak in the advanced direction may occur and a DTC may be output.