Lexus IS250 IS220d GSE20 ALE20 4GR-FSE CHARGING
INSPECTION PROCEDURE
CHECK LOCK FUNCTION OF CLUTCH PULLEY
CHECK LOCK OF CLUTCH PULLEY
CHARGING SYSTEM - Charge Warning Light Comes ON while Driving
INSPECTION PROCEDURE
| 1.CHECK LOCK FUNCTION OF CLUTCH PULLEY |
Check the lock function with the pulley installed in the vehicle.
Visually check that the rotor in the generator operates with the engine started.
Check the lock function with the pulley removed from the vehicle.
Remove the generator pulley cap. Using SST, hold the generator rotor.
Turn the clutch pulley clockwise and check that the outer ring locks.
| 2.CHECK LOCK OF CLUTCH PULLEY |
Start the engine and visually check looseness of the clutch pulley.
- OK:
- The clutch pulley is not loose.
| | TIGHTEN CLUTCH PULLEY TO THE SPECIFIED TORQUE |
|
|
| OK | |
| |
| REPLACE GENERATOR ASSEMBLY |
|
LEXUS IS250, IS220d / GSE20 ALE20
