REMOVE REPAIR SERVICE STARTER KIT

REMOVE STARTER DRIVE HOUSING ASSEMBLY

REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY

REMOVE STARTER ARMATURE ASSEMBLY

REMOVE STARTER ARMATURE PLATE

REMOVE PLANETARY GEAR

Remove the nut, and disconnect the lead wire from terminal C.

Remove the 3 nuts and repair service starter kit from the starter drive housing.

Remove the return spring.

Pull the plunger, and disconnect the plunger hook from the upper side of the starter pinion drive lever.

Using a "torx" wrench (T25), remove the 2 bolts.

Using a screwdriver, remove the rubber seal from the starter pinion drive lever.

Remove the starter drive housing from the starter pinion drive lever.

Pull out the yoke together with the armature.

Remove the 2 screws and starter commutator end frame.

Using a screwdriver, hold the spring back and disconnect the brush from the brush holder.

Disconnect the 4 brushes, and remove the brush holder.

Remove the starter armature from the yoke.

Remove the starter armature plate from the starter center bearing clutch.

Remove the 3 planetary gears.