Lexus IS250 IS220d GSE20 ALE20 2AD-FHV ENGINE MECHANICAL

ENGINE REAR OIL SEAL - INSTALLATION

1. INSTALL ENGINE REAR OIL SEAL

Apply MP grease to a new oil seal lip.

  • NOTICE:
  • Keep the lip free from foreign objects.
Engine Rear Oil Seal - Installation. 2AD-FHV ENGINE MECHANICAL. Lexus IS250 IS220d GSE20 ALE20

Using SST and a hammer, tap in the oil seal until its surface is flush with the edge of the rear oil seal retainer.

  • SST
  • 09223-56010
  • NOTICE:
Do not tap the oil seal at an angle.
Wipe off extra grease on the crankshaft.
2. INSTALL FLYWHEEL SUB-ASSEMBLY
Engine Rear Oil Seal - Installation. 2AD-FHV ENGINE MECHANICAL. Lexus IS250 IS220d GSE20 ALE20

Hold the crankshaft with SST.

  • SST
  • 09213-58013
    09330-00021
Engine Rear Oil Seal - Installation. 2AD-FHV ENGINE MECHANICAL. Lexus IS250 IS220d GSE20 ALE20

Install and tighten 8 new bolts a little at a time uniformly in the sequence shown in the illustration.

  • Torque:
  • 73 N*m{ 741 kgf*cm, 54 ft.*lbf}
  • HINT:
Do not reuse the flywheel installation bolts.
Be sure to check the tightening torque within 5 minutes after tightening.
Do not impact or damage the flywheel installation bolts. Be sure to handle them carefully.
Make sure that the seating surface of the flywheel installation bolts and installation surfaces of the crankshaft and flywheel are free of oil or foreign matter.
3. INSTALL CLUTCH DISC ASSEMBLY
  • HINT:
  • .
4. INSTALL MANUAL TRANSAXLE ASSEMBLY
  • HINT:
  • .
LEXUS IS250, IS220d / GSE20 ALE20
2AD-FHV ENGINE MECHANICAL
Lexus IS250 IS220d GSE20 ALE20
ENGINE REAR OIL SEAL