REMOVE COOL AIR INTAKE DUCT SEAL

REMOVE NO. 1 INLET AIR CLEANER

REMOVE NO. 1 ENGINE COVER

REMOVE V-RIBBED BELT

Remove the 11 clips and intake duct seal.

Remove the bolt, clip and inlet air cleaner.

Remove the No. 1 engine cover.

Release the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.

While turning the belt tensioner counterclockwise, align its holes, and then insert a 5 mm (0.20 in.) bar into the holes to hold the belt tensioner.