INSPECT EFI RELAY

Remove the engine room No. 1 relay block cover.

Remove the EFI relay from the engine room No. 1 relay block.

Measure the EFI relay resistance according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Specified Condition
  3 - 5	10 kΩ or higher
  3 - 5	Below 1 Ω (when battery voltage is applied between terminals 1 and 2)

Reinstall the EFI relay to the engine room No. 1 relay block.

Reinstall the engine room No. 1 relay block cover.