Lexus IS250 IS220d GSE20 ALE20 2AD-FHV ENGINE CONTROL SYSTEM
ECM - REMOVAL
| 1. REMOVE COOL AIR INTAKE DUCT SEAL |
Remove the 11 clips and intake duct seal.
| 2. REMOVE ENGINE ROOM SIDE COVER LH |
Remove the 4 clips and side cover.
| 3. REMOVE ECM |
Remove the 2 bolts and nut.
Remove the ECM with bracket.
| 4. DISCONNECT ECM CONNECTOR |
Disconnect the 2 ECM connectors.
Raise the 2 levers while pushing the locks on the 2 levers, and disconnect the 2 ECM connectors.
- NOTICE:
- After disconnecting the connector, make sure that dirt, water and other foreign matter do not contact the connecting part of the connector.
LEXUS IS250, IS220d / GSE20 ALE20