INSTALL CAMSHAFT POSITION SENSOR

CONNECT WIRING HARNESS PROTECTOR

INSTALL NO. 1 AIR CLEANER INLET

INSTALL COOL AIR INTAKE DUCT SEAL

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

Install the camshaft position sensor with the bolt.

• Torque:
• 8.8 N*m{ 90 kgf*cm, 78 in.*lbf}

Connect the camshaft position sensor connector.

Connect the wiring harness protector and install the 3 nuts.

Install the inlet air cleaner with the bolt and clip.

• Torque:
• 5.0 N*m{ 51 kgf*cm, 44 in.*lbf}

Install the intake duct seal with the 11 clips.