Lexus IS250 IS220d GSE20 ALE20 2AD-FHV ENGINE CONTROL SYSTEM
CAMSHAFT POSITION SENSOR - REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL |
Remove the 11 clips and intake duct seal.
2. REMOVE NO. 1 AIR CLEANER INLET |
Remove the bolt, clip and inlet air cleaner.
3. DISCONNECT WIRING HARNESS PROTECTOR |
Remove the 3 nuts and disconnect the wiring harness protector.
4. REMOVE CAMSHAFT POSITION SENSOR |
Disconnect the camshaft position sensor connector.
Remove the bolt and the camshaft position sensor.
LEXUS IS250, IS220d / GSE20 ALE20