VACUUM SWITCHING VALVE - INSPECTION

Using an ohmmeter, measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Terminals	Resistance
  1 - 2	28.3 to 31.1 Ω

If the result is not as specified, replace the No. 1 vacuum switching valve assembly.

Check the air does not flow from the port as shown in the illustration.

If the result is not as specified, replace the VSV assembly.

Apply battery voltage across the terminals.

Check the air flows from the port as shown in the illustration.

If the result is not as specified, replace the VSV assembly.