Lexus IS250 IS220d GSE20 ALE20 2AD-FHV COOLING
RADIATOR - DISASSEMBLY
| 1. REMOVE UPPER RADIATOR TANK |
Install the claw to the overhaul handle, inserting it in the hole in part A as shown in the illustration.
- SST
- 09230-01010(09231-01010,09231-01030)
While gripping the handle, adjust the stopper bolt so that dimension B is as shown in the illustration.
- NOTICE:
- If this adjustment is not performed, the claw will be damaged.
- Dimension B:
- 0.2 to 0.3 mm (0.008 to 0.012 in.)
Using SST to release the caulking, grip the handle until it is stopped by the stopper bolt.
- SST
- 09230-01010(09231-01010,09231-01030)
Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic hammer and remove the tank.
Remove the O-ring.
| 2. REMOVE LOWER RADIATOR TANK |
- HINT:
- Removal procedure of the lower radiator tank is the same as that of the upper radiator tank.
| 3. INSPECT LOCK PLATE FOR DAMAGE |
Inspect the lock plate for damage.
- HINT:
If the sides of the lock plate groove are deformed, reassembly of the tank will be impossible. Correct any deformations with pliers.
Water leakage will result if the bottom of the lock plate groove is damaged or dented. Repair or replace if necessary.
- NOTICE:
- The radiator assembly can be recaulked only twice. After the 2nd time, the radiator core must be replaced.
LEXUS IS250, IS220d / GSE20 ALE20