DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

REMOVE RADIATOR SUPPORT OPENING COVER

REMOVE NO. 1 INLET AIR CLEANER

REMOVE NO. 1 ENGINE COVER

REMOVE V-RIBBED BELT

REMOVE GENERATOR ASSEMBLY

Remove the 11 clips and intake duct seal.

Remove the bolt, clip and inlet air cleaner.

Remove the No. 1 engine cover.

Release the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.

While turning the belt tensioner counterclockwise, align its holes, and then insert a 5 mm (0.20 in.) bar into the holes to hold the belt tensioner.

Disconnect the generator connector.

Remove the bolt and disconnect the wire harness clamp bracket.

Remove the nut and disconnect the wire harness from terminal B.

Disconnect the clamp from the clamp bracket.

Remove the 3 bolts (A) and generator assembly.

Remove the bolt (B) and clamp bracket from the generator assembly.