Parking Assist Monitor System Guide Lines Are Displayed With Vehicle Center Line
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK SCREEN MODE
CHECK HARNESS AND CONNECTOR (REAR TELEVISION CAMERA ASSEMBLY - BODY GROUND)
PARKING ASSIST MONITOR SYSTEM - Guide Lines are Displayed with Vehicle Center Line |
DESCRIPTION
The rear television camera assembly can create parking guide lines. As this function is not necessary on vehicles with the rear view monitor system, the guide line creation function of the rear television camera assembly is disabled.
WIRING DIAGRAM
INSPECTION PROCEDURE
Check the rear view monitor screen.
ResultResult
| Proceed to
|
Guide lines are displayed with vehicle center lines
| A
|
Guide lines are displayed without vehicle center lines
| B
|
2.CHECK HARNESS AND CONNECTOR (REAR TELEVISION CAMERA ASSEMBLY - BODY GROUND) |
Disconnect the rear television camera assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
S31-1 (CURT) - Body ground
| Always
| Below 1 Ω
|
Text in Illustration*a
| (Front view of harness connector) (to Rear Television Camera Assembly)
|
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
OK |
|
|
|
REPLACE REAR TELEVISION CAMERA ASSEMBLY (Click here) |
|