Rear Door Outside Moulding Reassembly

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE REAR DOOR UPPER NO. 2 OUTSIDE MOULDING PAD

  2. REMOVE REAR DOOR REAR NO. 2 OUTSIDE MOULDING PAD

  3. REMOVE REAR DOOR UPPER NO. 1 OUTSIDE MOULDING PAD

Rear Door Outside Moulding -- Reassembly


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR DOOR UPPER NO. 2 OUTSIDE MOULDING PAD
HINT:
When installing the rear door upper No. 2 outside moulding pad, heat the rear door outside moulding using a heat light.
Standard:
Item
Temperature
Rear Door Outside Moulding
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the rear door outside moulding excessively.

  1. When using a new rear door outside moulding:

    1. Clean the surface of a new rear door outside moulding.

    2. Using a heat light, heat the rear door outside moulding surface.

  1. When reusing the rear door outside moulding:

    1. Using a heat light, heat the rear door outside moulding surface.

    2. Remove the double-sided tape from the rear door outside moulding.

    3. Wipe off any tape adhesive residue with cleaner.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Door Outside Moulding Reassembly

  1. Install a new rear door upper No. 2 outside moulding pad.

    1. Remove the peeling paper from the face of a new rear door upper No. 2 outside moulding pad.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    2. Align the rear door upper No. 2 outside moulding pad with the mark-off line of the rear door outside moulding and install it as shown in the illustration.

      HINT:
      Press the rear door upper No. 2 outside moulding pad firmly to install it.
      Text in Illustration
      *a
      		Mark-off Line


2. REMOVE REAR DOOR REAR NO. 2 OUTSIDE MOULDING PAD
HINT:
When installing the rear door rear No. 2 outside moulding pad, heat the rear door outside moulding using a heat light.
Standard:
Item
Temperature
Rear Door Outside Moulding
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the rear door outside moulding excessively.

  1. When using a new rear door outside moulding:

    1. Clean the surface of a new rear door outside moulding.

    2. Using a heat light, heat the rear door outside moulding surface.

  1. When reusing the rear door outside moulding:

    1. Using a heat light, heat the rear door outside moulding surface.

    2. Remove the double-sided tape from the rear door outside moulding.

    3. Wipe off any tape adhesive residue with cleaner.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Door Outside Moulding Reassembly

  1. Install a new rear door rear No. 2 outside moulding pad.

    1. Remove the peeling paper from the face of a new rear door rear No. 2 outside moulding pad.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    2. Align the rear door rear No. 2 outside moulding pad with the mark-off line of the rear door outside moulding and install it as shown in the illustration.

      HINT:
      Press the rear door rear No. 2 outside moulding pad firmly to install it.
      Text in Illustration
      *a
      		Mark-off Line


3. REMOVE REAR DOOR UPPER NO. 1 OUTSIDE MOULDING PAD
HINT:
When installing the rear door upper No. 1 outside moulding pad, heat the rear door outside moulding using a heat light.
Standard:
Item
Temperature
Rear Door Outside Moulding
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the rear door outside moulding excessively.

  1. When using a new rear door outside moulding:

    1. Clean the surface of a new rear door outside moulding.

    2. Using a heat light, heat the rear door outside moulding surface.

  1. When reusing the rear door outside moulding:

    1. Using a heat light, heat the rear door outside moulding surface.

    2. Remove the double-sided tape from the rear door outside moulding.

    3. Wipe off any tape adhesive residue with cleaner.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Door Outside Moulding Reassembly

  1. Install a new rear door upper No. 1 outside moulding pad.

    1. Remove the peeling paper from the face of a new rear door upper No. 1 outside moulding pad.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    2. Align the rear door upper No. 1 outside moulding pad with the mark-off line of the rear door outside moulding and install it as shown in the illustration.

      HINT:
      Press the rear door upper No. 1 outside moulding pad firmly to install it.
      Text in Illustration
      *a
      		Mark-off Line