Dtc U0416 Invalid Data Received From Vehicle Dynamics Control Module

Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200
Jf2A Transfer 4Wd Awd. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

RECONFIRM DTC

DTC U0416 Invalid Data Received from Vehicle Dynamics Control Module


DESCRIPTION

This DTC is output if a wheel speed malfunction signal is sent from the skid control ECU (master cylinder solenoid).

DTC No.
DTC Detection Condition
  1. Diagnosis Condition
  2. Malfunction Status
  3. Malfunction Time
  4. Other
Trouble Area
U0416
  1. Ignition switch ON (3 seconds elapse after ignition switch is turned to ON)
  2. Wheel speed sensor malfunction signals from skid control ECU are received
  3. 0.06 seconds or more (malfunction signal received 1 or more times) when transfer is switching between high and low, or center differential is switching between free and lock
  4. 1 trip detection logic
  1. CAN communication system
  2. Vehicle stability control system (w/ VSC)
  3. Anti-lock brake system (w/o VSC)

INSPECTION PROCEDURE

1.RECONFIRM DTC

  1. Clear the DTC (Click here).

  1. Check if the same DTC is output (Click here).

    Result
    Result
    		Proceed to
    DTC U0122 and U0416 are output
    		A
    Only DTC U0416 is output (w/ VSC)
    		B
    Only DTC U0416 is output (w/o VSC)
    		C
    DTC is not output
    		D



B
CHECK BRAKE CONTROL SYSTEM (Click here)

C
CHECK BRAKE CONTROL SYSTEM (Click here)

D
USE SIMULATION METHOD TO CHECK (Click here)
A

Go to U0122 (Click here)