Dtc B1575 Gvif Disconnected (From Emv/Mm Integrated Device To Multi Display)

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CLEAR DTC

CHECK FOR DTC

CHECK HARNESS AND CONNECTOR (GVIF CABLE)

CHECK HARNESS AND CONNECTOR (GVIF CABLE)

REPLACE MULTI-DISPLAY ASSEMBLY

CLEAR DTC

CHECK FOR DTC

DTC B1575 GVIF Disconnected (from EMV/MM Integrated Device to Multi Display)


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
B1575
GVIF disconnected (from multi-media module receiver assembly to multi-display assembly)
  1. Harness and connector (GVIF cable)
  2. Multi-display assembly
  3. Multi-media module receiver assembly

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type). Dtc B1575 Gvif Disconnected (From Emv/Mm Integrated Device To Multi Display)


INSPECTION PROCEDURE

1.CLEAR DTC

  1. Clear the DTCs (Click here).


NEXT


2.CHECK FOR DTC

  1. Recheck for DTCs and check if the same DTC is output again (Click here).

    OK:
    No DTCs are output.


NG
Go to step 3
OK

USE SIMULATION METHOD TO CHECK (Click here)

3.CHECK HARNESS AND CONNECTOR (GVIF CABLE)

  1. Check if the GVIF cable connectors between the multi-media module receiver assembly and the multi-display assembly have any connection problems (Click here).

    OK:
    There are no connection problems.


NG
REMOVE CONNECTION PROBLEMS (GVIF CABLE)
OK


4.CHECK HARNESS AND CONNECTOR (GVIF CABLE)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type). Dtc B1575 Gvif Disconnected (From Emv/Mm Integrated Device To Multi Display)

  1. Remove the GVIF cable from the multi-media module receiver assembly and multi-display assembly.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    F107-1 (GVI+) - F108-1 (GV+)
    		Always
    		Below 1 Ω
    F107-2 (GVI-) - F108-2 (GV-)
    		Always
    		Below 1 Ω
    F107-3 (GVG1) - F108-3 (GVG)
    		Always
    		Below 1 Ω
    F107-1 (GVI+) or F108-1 (GV+) - Body ground
    		Always
    		10 kΩ or higher
    F107-2 (GVI-) or F108-2 (GV-) - Body ground
    		Always
    		10 kΩ or higher
    F107-3 (GVG1) or F108-3 (GVG) - Body ground
    		Always
    		10 kΩ or higher
    Text in Illustration
    *a
    		GVIF Cable
    (to Multi-media Module Receiver Assembly)
    *b
    		GVIF Cable
    (to Multi-display Assembly)


NG
REPLACE HARNESS AND CONNECTOR (GVIF CABLE)
OK


5.REPLACE MULTI-DISPLAY ASSEMBLY

  1. Replace the multi-display assembly with a new or known good one (Click here).


NEXT


6.CLEAR DTC

  1. Clear the DTCs (Click here).


NEXT


7.CHECK FOR DTC

  1. Recheck for DTCs and check if the same DTC is output again (Click here).

    OK:
    No DTCs are output.


NG
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)
OK

END (MULTI-DISPLAY ASSEMBLY IS DEFECTIVE)