Rear Door Outside Moulding Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exterior Panels Trim. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH

Rear Door Outside Moulding -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Exterior Panels Trim.Front Bumper (For Standard).Rear Door Outside Moulding Removal

  1. Put protective tape around the rear door outside moulding sub-assembly LH.

    Text in Illustration
    *1
    		Protective Tape


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a moulding remover, detach the 3 clamps and 7 clips, and remove the rear door outside moulding sub-assembly LH.

  1. Remove any clips remaining on the door panel.

    NOTICE:
    Be careful not to allow any clips or pieces of clips to fall inside the door panel.