Blind Spot Monitor System Problem Symptoms Table

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

Blind Spot Monitor System -- Problem Symptoms Table


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Entire System
Symptom
Suspected Area
See page
System does not operate at all
Proceed to "Power Source Circuit"
Click here
CAN communication system (for LHD with Central Gateway)
Click here
CAN communication system (for RHD with Central Gateway)
Click here
Steering pad switch assembly
Click here
Meter / gauge system
Click here
Blind spot monitor sensor LH
Click here
System cannot be turned off
CAN communication system (for LHD with Central Gateway)
Click here
CAN communication system (for RHD with Central Gateway)
Click here
Steering pad switch assembly
Click here
Meter / gauge system
Click here
Blind spot monitor sensor LH
Click here
"BSM not available" or "Check BSM System" is displayed on the multi-information display
Check abnormality history
Click here
Blind spot monitor sensor RH
Click here
Blind spot monitor sensor LH
Click here
Combination meter assembly
Click here

Blind Spot Monitor Function
Symptom
Suspected Area
See page
Outer rear view mirror indicator RH does not illuminate
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Outer mirror RH
Click here
Outer mirror control ECU assembly RH
Click here
Outer rear view mirror assembly RH
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH does not illuminate
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Outer mirror LH
Click here
Outer mirror control ECU assembly LH
Click here
Outer rear view mirror assembly LH
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH remains illuminated
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH remains illuminated
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH does not flash
Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH does not flash
Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH continues to flash
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH continues to flash
Blind spot monitor sensor LH
Click here

RCTA Function (w/ RCTA)
Symptom
Suspected Area
See page
Function does not operate at all (Blind spot monitor function operates normally)
Data List / Active Test (Reverse)
Click here
Automatic transmission system (for AE80F)
Click here
Automatic transmission system (for AB60F, 1UR-FE)
Click here
Automatic transmission system (for AB60F, 1VD-FTV)
Click here
Automatic transmission system (for AB60F, 1VD-FTV with DPF)
Click here
Blind spot monitor sensor RH
Click here
When shift lever is in R, detection operation is normal but RCTA indicator does not appear on multi-display assembly
CAN communication system (for LHD with Central Gateway)
Click here
CAN communication system (for RHD with Central Gateway)
Click here
Rear television camera assembly
Click here
Blind spot monitor sensor LH
Click here
Blind spot monitor sensor RH
Click here
Radio and Display Receiver (w/ Audio and Visual System [for Radio and Dispay Type])
Click here
Multi-display assembly (w/ Navigation System)
Click here