Theft Deterrent System (W/ Entry And Start System) Customize Parameters

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CUSTOMIZE THEFT DETERRENT SYSTEM

Theft Deterrent System (W/ Entry And Start System) -- Customize Parameters



1. CUSTOMIZE THEFT DETERRENT SYSTEM
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the GTS

    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Customize Setting / Security or Wireless Door Lock.

    5. Select the setting by referring to the table below.

      Security
      Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      Window Open Warning
      		ON
      		This function is used to enable or disable the Window open warning.
      		OFF/ON
      		Main Body ECU (Multiplex Network Body ECU)
      Slide Roof Open Warning*4
      		ON
      		This function is used to enable or disable the sliding roof open warning.
      		OFF/ON
      Intrusion Win Opened*1
      		OFF
      		Sets the sensitivity of the intrusion sensor when the windows are opened.
      		OFF/ON
      Security control with mechanism key*2
      		OFF
      		This function makes it possible to cancel the security alarm with the mechanical key.
      		OFF/ON
      Intrusion Sensor Sound Detection Function*1, *3
      		ON
      		Set to detect an intrusion using the sound detection function.
      		OFF/ON
      Intrusion Sensor Sensitivity Level*1, *3
      		Normal
      		This function adjusts sensitivity of the sensor that detects intrusions.
      		Low/Normal
      Security Alarm Setting*5
      		Normal
      		Setting for theft warning siren assembly warning sounding conditions.
      1. Normal: All alarm warning conditions are met..
      2. Low: Short detected in theft warning siren assembly circuit.
      		Low/Normal

      1. *1: w/ Intrusion Sensor
      2. *2: Vehicles displaying the Item "Security control with mechanism key" on the GTS
      3. *3: w/o Door Ajar Warning Buzzer Function
      4. *4: w/ Sliding Roof System
      5. *5: w/ Theft Warning Siren Assembly

      Wireless Door Lock
      Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      Panic Function*
      		ON
      		This function operates the theft deterrent system when the panic switch is pressed and held for 1.5 seconds.
      		OFF/ON
      		Main Body ECU (Multiplex Network Body ECU)
      1. *: w/ Panic Switch