Steering Heater Switch Removal

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Steering Column. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

  4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  8. REMOVE NO. 1 SWITCH HOLE BASE

  9. REMOVE STEERING HEATER SWITCH

Steering Heater Switch -- Removal


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


Land Cruiser. Urj200, 202 Grj200 Vdj200.Steering Column.Power Tilt And Power Telescopic Steering Column System.Steering Heater Switch Removal

  1. Put protective tape around the No. 2 instrument panel finish panel cushion.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.



3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the clip.

  1. Remove the screw.

  1. Detach the 8 claws.

  1. Remove the panel pad and disconnect the connectors and 2 clamps.



4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Steering Column.Power Tilt And Power Telescopic Steering Column System.Steering Heater Switch Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.



5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. Place protective tape as shown in the illustration.



  1. Using a moulding remover, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Steering Column.Power Tilt And Power Telescopic Steering Column System.Steering Heater Switch Removal


    Text in Illustration
    *A
    		w/ Entry and Start System
    		*B
    		w/o Entry and Start System
    *1
    		Protective Tape
    		-
    		-


6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws.

  1. Detach the 3 claws.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover.



7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200.Steering Column.Power Tilt And Power Telescopic Steering Column System.Steering Heater Switch Removal

  1. Using a screwdriver, detach the 2 claws and open the hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


  1. w/ Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 16 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Steering Column.Power Tilt And Power Telescopic Steering Column System.Steering Heater Switch Removal



  1. w/o Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 9 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Steering Column.Power Tilt And Power Telescopic Steering Column System.Steering Heater Switch Removal



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for Automatic Air Conditioning System:

    1. Detach the 2 claws and remove the room temperature sensor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and disconnect the 2 control cables.

  1. Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.



8. REMOVE NO. 1 SWITCH HOLE BASE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 4 claws and remove the switch.

    HINT:
    Tape the screwdriver tip before use.


9. REMOVE STEERING HEATER SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws to remove the steering heater switch from the lower instrument panel finish panel sub-assembly.