Forward Recognition Camera System Data List / Active Test

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
Cruise Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DATA LIST

  1. ACTIVE TEST

Forward Recognition Camera System -- Data List / Active Test



DATA LIST
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Chassis / Front Recognition Camera / Data List.

  5. Read the Data List according to the display on the GTS.

    Front Recognition Camera
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Blockage Status
    		Displays whether there is a camera obstruction malfunction/
    ON or OFF
    		ON: Forward recognition camera obstructed
    OFF: Forward recognition camera not obstructed
    		-
    Blockage History
    		Displays whether there is camera obstruction history/
    ON or OFF
    		ON: Forward recognition camera obstruction history exists
    OFF: Forward recognition camera obstruction history does not exist
    		-
    Low Temperature Status
    		Displays whether there is a low temperature malfunction/
    ON or OFF
    		ON: Forward recognition camera low temperature malfunction exists
    OFF: Forward recognition camera low temperature malfunction does not exist
    		-
    High Temperature Status1
    		Displays whether there is a high temperature malfunction/
    ON or OFF
    		ON: Forward recognition camera high temperature malfunction exists
    OFF: Forward recognition camera high temperature malfunction does not exist
    		-
    High Temperature History1
    		Displays whether there is high temperature history/
    ON or OFF
    		ON: Forward recognition camera high temperature history exists
    OFF: Forward recognition camera high temperature history does not exist
    		-
    High Temperature Status2
    		Displays whether there is a high temperature malfunction/
    ON or OFF
    		ON: Forward recognition camera high temperature malfunction exists
    OFF: Forward recognition camera high temperature malfunction does not exist
    		-
    High Temperature History2
    		Displays whether there is high temperature history/
    ON or OFF
    		ON: Forward recognition camera high temperature history exists
    OFF: Forward recognition camera high temperature history does not exist
    		-
    Backlight Status
    		Status of the Backlight Status /
    OFF or Driving Backlight.
    		Driving Backlight.: Driving towards the sun
    OFF: Not driving towards the sun
    		-
    Vehicle Information (2WD/4WD)
    		Vehicle information (drivetrain) stored in forward recognition camera/
    2WD, 4WD or Unknown
    		2WD: for 2WD
    4WD: for 4WD
    Unknown: Vehicle information not confirmed
    		-
    Vehicle Information (Conv/HV)
    		Vehicle information (conventional/ hybrid) stored in forward recognition camera/
    Conv, HV or Unknown
    		Conv: Conventional
    HV: Hybrid vehicle
    Unknown: Vehicle information not confirmed
    		-


ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Chassis / Front Recognition Camera / Active Test.

  5. Perform Active Test according to the display on the GTS.

    HINT:
    The engine switch must be turned on (IG) to proceed with the Active Test using the GTS.

    Front Recognition Camera
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    PCS Buzzer
    		Sounds pre-collision city buzzer
    		ON / OFF
    		Test possible with engine switch on (IG), vehicle stopped