Pre-Crash Safety System Cancel Switch Inspection

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Pre-Crash Safety. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY

Pre-Crash Safety System Cancel Switch -- Inspection



1. INSPECT PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Pre-Crash Safety.Pre-Crash Safety System.Pre-Crash Safety System Cancel Switch Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance
    Tester Connection
    		Switch Condition
    		Specified Condition
    8 (ECU) - 5 (GND)
    		Pre-crash system cancel switch not pressed
    		10 kΩ or higher
    Pre-crash system cancel switch pressed
    		Below 1 Ω
    If the result is not as specified, replace the pre-crash system cancel switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Pre-crash System Cancel Switch Assembly)

  1. Apply battery voltage to the pre-crash system cancel switch assembly and check that it illuminates.

    OK
    Tester Connection
    		Switch Condition
    Battery positive (+) → Terminal 7 (ILL+) Battery negative (-) → Terminal 6 (ILL-)
    		Illuminates
    If the result is not as specified, replace the pre-crash system cancel switch assembly.