Side Monitor System How To Proceed With Troubleshooting

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK NAVIGATION SYSTEM

  4. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

  5. CHECK FOR DTC*

  6. PROBLEM SYMPTOMS TABLE

  7. OVERALL ANALYSIS AND TROUBLESHOOTING

  8. ADJUST, REPAIR OR REPLACE

  9. CONFIRMATION TEST

Side Monitor System -- How To Proceed With Troubleshooting


HINT:
  1. Use the following procedure to troubleshoot the side monitor system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

    1. Measure the voltage with the ignition switch off.

      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, replace or recharge the battery before proceeding to the next step.

    NEXT


    3.CHECK NAVIGATION SYSTEM

    1. Refer to the navigation system (Click here).

      Result
      Result
      		Proceed to
      Navigation system is normal
      		A
      Navigation system is abnormal
      		B



    		B.
    Go to NAVIGATION SYSTEM (Click here)
    A


    4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      1. for LHD: Click here
      2. for RHD: Click here
      Result
      Result
      		Proceed to
      CAN DTC is not output
      		A
      CAN DTC is output (for LHD)
      		B
      CAN DTC is output (for RHD)
      		C


    		B.
    Go to CAN COMMUNICATION SYSTEM (Click here)

    		C.
    Go to CAN COMMUNICATION SYSTEM (Click here)
    A


    5.CHECK FOR DTC*

    1. Check for DTCs and note any codes that are output (Click here).

    2. Clear the DTC (Click here).

    3. Check for DTCs. Try to prompt the DTC by simulating the original activity that the DTC suggests.

      NOTICE:
      The parking assist ECU may store the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the side monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.
      System
      		Proceed to
      Parking Assist Monitor System (w/ Side Monitor System)
      		Click here
      Wide View Front Monitor System
      		Click here
      Result
      Result
      		Proceed to
      DTC is not output
      		A
      DTC is output
      		B


    		B.
    Go to step 8
    A


    6.PROBLEM SYMPTOMS TABLE

    1. Refer to the Problem Symptoms Table (Click here).

      Result
      Result
      		Proceed to
      Fault is not listed in Problem Symptoms Table
      		A
      Fault is listed in Problem Symptoms Table
      		B



    		B.
    ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE
    A


    7.OVERALL ANALYSIS AND TROUBLESHOOTING

    1. Terminals of ECU (Click here).


    NEXT


    8.ADJUST, REPAIR OR REPLACE

      NEXT


      9.CONFIRMATION TEST

        NEXT

        END