Wiper Switch Inspection

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Wiper Washer. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for LHD)

  2. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for RHD LH Side)

  3. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for RHD RH Side)

Wiper Switch -- Inspection



1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for LHD)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Wiper Switch Inspection

  1. w/ Rain Sensor
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Front Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-1 (+S) - E16-3 (+1)
    		OFF
    		Below 1 Ω
    E16-2 (+B) - E16-3 (+1)
    		MIST
    LO
    E16-1 (+S) - E16-3 (+1)
    E16-8 (AUTO) - E16-9 (E)
    		AUTO
    E16-2 (+B) - E16-4 (+2)
    		HI
    Adjusting Ring
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-7 (VR1) - E16-6 (VR2)
    		P1
    		209 to 231 Ω
    P2
    		114 to 126 Ω
    P3
    		58.9 to 65.1 Ω
    P4
    		Below 1 Ω
    Front Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E15-7 (WF)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    Rear Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E15-2 (C1R)
    E15-4 (EW) - E15-3 (+1R)
    		OFF
    		10 kΩ or higher
    E15-4 (EW) - E15-2 (C1R)
    		INT
    		Below 1 Ω
    E15-4 (EW) - E15-3 (+1R)
    		ON
    Rear Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E16-5 (WR)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    If the result is not as specified, replace the windshield wiper switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Windshield Wiper Switch Assembly)
    *b
    		Windshield Wiper Switch Assembly
    (Adjusting Ring Position)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Wiper Switch Inspection

  1. w/o Rain Sensor
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Front Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-1 (+S) - E16-3 (+1)
    		OFF
    		Below 1 Ω
    INT
    E16-2 (+B) - E16-3 (+1)
    		MIST
    LO
    E16-2 (+B) - E16-4 (+2)
    		HI
    Front Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E15-7 (WF)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    Rear Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E15-2 (C1R)
    E15-4 (EW) - E15-3 (+1R)
    		OFF
    		10 kΩ or higher
    E15-4 (EW) - E15-2 (C1R)
    		INT
    		Below 1 Ω
    E15-4 (EW) - E15-3 (+1R)
    		ON
    Rear Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E16-5 (WR)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    If the result is not as specified, replace the windshield wiper switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Windshield Wiper Switch Assembly)


2. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for RHD LH Side)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Wiper Switch Inspection

  1. w/ Rain Sensor
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Front Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-1 (+S) - E16-3 (+1)
    		OFF
    		Below 1 Ω
    E16-2 (+B) - E16-3 (+1)
    		MIST
    LO
    E16-1 (+S) - E16-3 (+1)
    E16-8 (AUTO) - E16-9 (E)
    		AUTO
    E16-2 (+B) - E16-4 (+2)
    		HI
    Adjusting Ring
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-7 (VR1) - E16-6 (VR2)
    		P1
    		209 to 231 Ω
    P2
    		114 to 126 Ω
    P3
    		58.9 to 65.1 Ω
    P4
    		Below 1 Ω
    Front Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E15-7 (WF)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    Rear Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E15-2 (C1R)
    E15-4 (EW) - E15-3 (+1R)
    		OFF
    		10 kΩ or higher
    E15-4 (EW) - E15-2 (C1R)
    		INT
    		Below 1 Ω
    E15-4 (EW) - E15-3 (+1R)
    		ON
    Rear Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E16-5 (WR)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    If the result is not as specified, replace the windshield wiper switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Windshield Wiper Switch Assembly)
    *b
    		Windshield Wiper Switch Assembly
    (Adjusting Ring Position)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Wiper Switch Inspection

  1. w/o Rain Sensor
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Front Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-1 (+S) - E16-3 (+1)
    		OFF
    		Below 1 Ω
    INT
    E16-2 (+B) - E16-3 (+1)
    		MIST
    LO
    E16-2 (+B) - E16-4 (+2)
    		HI
    Front Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E15-7 (WF)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    Rear Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E15-2 (C1R)
    E15-4 (EW) - E15-3 (+1R)
    		OFF
    		10 kΩ or higher
    E15-4 (EW) - E15-2 (C1R)
    		INT
    		Below 1 Ω
    E15-4 (EW) - E15-3 (+1R)
    		ON
    Rear Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E16-5 (WR)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    If the result is not as specified, replace the windshield wiper switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Windshield Wiper Switch Assembly)


3. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for RHD RH Side)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Wiper Switch Inspection

  1. w/ Rain Sensor
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Front Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-4 (+S) - E16-2 (+1)
    		OFF
    		Below 1 Ω
    E16-3 (+B) - E16-2 (+1)
    		MIST
    LO
    E16-4 (+S) - E16-2 (+1)
    E16-7 (AUTO) - E16-6 (E)
    		AUTO
    E16-3 (+B) - E16-1 (+2)
    		HI
    Adjusting Ring
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-9 (VR1) - E16-8 (VR2)
    		P1
    		209 to 231 Ω
    P2
    		114 to 126 Ω
    P3
    		58.9 to 65.1 Ω
    P4
    		Below 1 Ω
    Front Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-7 (EW) - E15-4 (WF)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    Rear Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-7 (EW) - E15-2 (C1R)
    E15-7 (EW) - E15-1 (+1R)
    		OFF
    		10 kΩ or higher
    E15-7 (EW) - E15-2 (C1R)
    		INT
    		Below 1 Ω
    E15-7 (EW) - E15-1 (+1R)
    		ON
    Rear Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-4 (EW) - E16-5 (WR)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    If the result is not as specified, replace the windshield wiper switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Windshield Wiper Switch Assembly)
    *b
    		Windshield Wiper Switch Assembly
    (Adjusting Ring Position)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Wiper Switch Inspection

  1. w/o Rain Sensor
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Front Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E16-4 (+S) - E16-2 (+1)
    		OFF
    		Below 1 Ω
    INT
    E16-3 (+B) - E16-2 (+1)
    		MIST
    LO
    E16-3 (+B) - E16-1 (+2)
    		HI
    Front Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-7 (EW) - E15-4 (WF)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    Rear Wiper Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-7 (EW) - E15-2 (C1R)
    E15-7 (EW) - E15-1 (+1R)
    		OFF
    		10 kΩ or higher
    E15-7 (EW) - E15-2 (C1R)
    		INT
    		Below 1 Ω
    E15-4 (EW) - E15-1 (+1R)
    		ON
    Rear Washer Switch
    Tester Connection
    		Switch Condition
    		Specified Condition
    E15-7 (EW) - E16-10 (WR)
    		ON
    		Below 1 Ω
    OFF
    		10 kΩ or higher
    If the result is not as specified, replace the windshield wiper switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Windshield Wiper Switch Assembly)