Dtc B15B8 Harddisk Malfunction
DESCRIPTION
INSPECTION PROCEDURE
CHECK HARD DISC (OPERATION CHECK)
CLEAR DTC
CHECK DTC
REPLACE HARD DISC
CLEAR DTC
CHECK DTC
DTC B15B8 Harddisk Malfunction |
DESCRIPTION
This DTC is stored when the hard disc which is built into the multi-media module receiver assembly has an initialization malfunction or read/write errors occur more than a specified number of times.DTC Code
| DTC Detection Condition
| Trouble Area
|
B15B8
| Hard disc malfunction
| Hard disc
|
INSPECTION PROCEDURE
1.CHECK HARD DISC (OPERATION CHECK) |
Enter the "Failure Diagnosis" screen. Refer to Check Hard disc in Operation Check (Click here).
Select "HDD Check" and check the result.
- OK:
- "OK" is displayed.
- HINT:
- After selecting "HDD Check", it may take a while until the result is displayed.
- If the cabin temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher, the HDD may not operate normally, and "NG" may be shown on the display. Make sure to perform the inspection with the cabin at an appropriate temperature.
Text in Illustration*a
| Result
|
Clear the DTCs (Click here).
Recheck for DTCs and check if the same DTC is output again (Click here).
- OK:
- No DTCs are output.
- HINT:
- The hard disc may be malfunctioning even if DTC B15B8 is not output.
Replace the hard disc with a new or normally functioning one (Click here).
Clear the DTCs (Click here).
Recheck for DTCs and check if the same DTC is output again (Click here).
- OK:
- No DTCs are output.
- HINT:
- The hard disc may be malfunctioning even if DTC B15B8 is not output.
| REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here) |
|
|
OK |
|
|
|
END (HARD DISC IS DEFECTIVE) |
|