Side Step (W/ Foot Light) Installation

Clean the vehicle body surface.

1. Using a heat light, heat the vehicle body surface.
   

2. Remove the double-sided tape from the vehicle body.
   

3. Wipe off any tape adhesive residue with cleaner.
   

If reusing the side step assembly:
Clean the side step assembly.

1. Using a heat light, heat the side step assembly.
   

2. Remove the double-sided tape from the side step assembly.
   

3. Wipe off any tape adhesive residue with cleaner.
   





4. Apply new double-sided tape to the side step assembly, as shown in the illustration.
   
   

   
   
   
   
   

   Text in Illustration

   *1

   Double-sided Tape

   -

   -

Install the side step assembly.

1. Using a heat light, heat the vehicle body and side step assembly.
   

2. Remove the peeling paper from the face of the side step assembly.
   

   HINT:

   After removing the peeling paper, keep the exposed adhesive free from foreign matter.

3. Attach the 10 clips to install the side step assembly.
   

4. Install the 6 bolts.
   

   Torque:

   30 N*m{306 kgf*cm, 22 ft.*lbf}

5. Install the screw.
   





6. Connect the connector.
   
   

   
   
   
   
   

   Text in Illustration

   *1

   Double-sided Tape

   -

   -

Install the front fender mudguard LH with the clip.

Using a T30 "TORX" socket wrench, install the 4 screws.

Install the protector pipe with the 6 bolts.

Torque:

16 N*m{163 kgf*cm, 12 ft.*lbf}