Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Window Glass. Land Cruiser. Urj200, 202 Grj200 Vdj200
Front Passenger Side Power Window Switch -- Inspection |
| 1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Models with Jam Protection Function on 4 Windows) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 6 (UP) - 1 (GND) Manual up operation Below 1 Ω 7 (DOWN) - 1 (GND) Manual down operation Below 1 Ω 8 (AUTO) - 1 (GND) Auto up/down operation Below 1 Ω
- If the result is not as specified, replace the power window regulator switch assembly.
 |
Check that the LED illuminates.
Apply battery voltage to the power window regulator switch and check that the LED illuminates.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (LED)
Battery negative (-) → 1 (GND)LED illuminates
- If the result is not as specified, replace the power window regulator switch assembly.
Text in Illustration *1 LED *a Component without harness connected
(Power Window Regulator Switch Assembly)
| 2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Models with Jam Protection Function on Driver Door Window Only) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 4 (U) - 3 (B)
2 (SD) - 1 (D)UP Below 1 Ω 5 (SU) - 4 (U)
2 (SD) - 1 (D)OFF Below 1 Ω 5 (SU) - 4 (U)
3 (B) - 1 (D)DOWN Below 1 Ω
- If the result is not as specified, replace the power window regulator switch assembly.
Text in Illustration *a Component without harness connected
(Power Window Regulator Switch Assembly)
 |