Power Back Door System Customize Parameters

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Hatch. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CUSTOMIZING FUNCTION WITH GTS

Power Back Door System -- Customize Parameters



CUSTOMIZING FUNCTION WITH GTS
HINT:
The following item can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Utility / Customize Setting / PSD&PBD operation.

  5. Select the setting by referring to the table below.

    PSD&PBD operation
    Display
    		Default
    		Contents
    		Setting
    PBD SW Operation
    		0.8 s
    		Function that turns power back door closer switch on when switch is pushed once or held down for 0.8 seconds.
    		0.8s or ON
    PBD Buzzer
    		ON
    		Function that makes the power back door buzzer sound when power back door is operating
    		ON or OFF
    Door Unlock with 1 Motion
    		Back Door*1
    ALL DOORS*2
    		Function that selects the door or doors to unlock when the back door is locked and the transmitter switch (electrical key transmitter sub-assembly) is pushed to operate the power back door.
    		Back Door or ALL DOORS
    One Motion
    		0.8 s
    		Function that opens the back door when the transmitter switch is pressed with the back door unlocked.
    		OFF or 1 Op or 2 Op or 0.8s or Not Use
    One Motion with Unlock Door
    		Not Use
    		Function that opens the back door when the transmitter switch is pressed (power back door one motion function).
    		OFF or Not Use or 2 Op or 0.8 s

    HINT:
    *1: w/ Sound Library Function
    *2: w/o Sound Library Function