Dtc B1455/55 Driver Side Air Outlet Damper Foot/Def Control Servo Motor Circuit

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Heating Air Conditioning. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

READ VALUE USING GTS (A/O DAMPER DEF POS[D SIDE], A/O DAMPER DEF ACTUAL POS[D]))

CHECK DEF MODE DAMPER SERVO MOTOR

CHECK AIR CONDITIONING HARNESS ASSEMBLY

CHECK FOR DTC

DTC B1455/55 Driver Side Air Outlet Damper FOOT/DEF Control Servo Motor Circuit


DESCRIPTION

DEF mode damper servo motor sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the DEF mode damper servo motor2 to any position, which controls the air outlet changes.
HINT:
Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.

DTC Code
DTC Detection Condition
Trouble Area
B1455/55
The air outlet damper position does not change even if the air conditioning amplifier assembly operates the DEF mode damper servo motor
  1. DEF mode damper servo motor
  2. Air conditioning harness assembly
  3. Air conditioning amplifier assembly

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System). Dtc B1455/55 Driver Side Air Outlet Damper Foot/Def Control Servo Motor Circuit


INSPECTION PROCEDURE

1.READ VALUE USING GTS (A/O DAMPER DEF POS[D SIDE], A/O DAMPER DEF ACTUAL POS[D]))

  1. Use the Data List to check if the DEF mode damper servo motor is functioning properly (Click here).

    Air Conditioner
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    A/O Damper DEF Pos(D Side)
    		DEF mode damper servo motor target pulse / Min.: 128, Max.: 383
    1. FACE1: 245 (pulse)
    2. FACE2: 237 (pulse)
    3. B/L1: 221 (pulse)
    4. B/L2: 209 (pulse)
    5. FOOT-O: 199 (pulse)
    6. FOOT-D: 199 (pulse)
    7. FOOT-R: 169 (pulse)
    8. FOOT-F: 169 (pulse)
    9. F/D: 146 (pulse)
    10. DEF: 134 (pulse)
    1. Displayed between 134 and 245 pulse
    2. DEF mode damper servo motor system malfunction
    A/O Damper DEF Actual Pos(D)
    		DEF mode damper servo motor actual pulse / Min.: 128, Max.: 383
    1. FACE1: 245 (pulse)
    2. FACE2: 237 (pulse)
    3. B/L1: 221 (pulse)
    4. B/L2: 209 (pulse)
    5. FOOT-O: 199 (pulse)
    6. FOOT-D: 199 (pulse)
    7. FOOT-R: 169 (pulse)
    8. FOOT-F: 169 (pulse)
    9. F/D: 146 (pulse)
    10. DEF: 134 (pulse)
    1. Displayed between 134 and 245 pulse
    2. DEF mode damper servo motor system malfunction
    OK:
    When the DEF mode switch is turned, the actual pulse changes following the target pulse.
    Result
    Result
    		Proceed to
    Target pulse changes but actual pulse does not change
    		A
    Target pulse and actual pulse do not change
    		B
    Actual pulse changes following the target pulse (When troubleshooting according to the DTC)
    		C
    Actual pulse changes following the target pulse (When troubleshooting according to Problem Symptoms Table)
    		D


B
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)

C
Go to step 4

E
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
A


2.CHECK DEF MODE DAMPER SERVO MOTOR

  1. Replace the DEF mode damper servo motor (Click here).

    HINT:
    Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B1455/55 is not output.


NG
Go to step 3
OK

END (DEF MODE DAMPER SERVO MOTOR WAS DEFECTIVE)

3.CHECK AIR CONDITIONING HARNESS ASSEMBLY

  1. Replace the air conditioning harness assembly (Click here).

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B1455/55 is not output.


NG
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)
OK

END (AIR CONDITIONING HARNESS ASSEMBLY WAS DEFECTIVE)

4.CHECK FOR DTC

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B1455/55 is not output.


NG
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)