Back Door Garnish (W/ Tire Carrier) Removal
REMOVE REAR LIGHT ASSEMBLY LH
REMOVE REAR LIGHT ASSEMBLY RH
REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
REMOVE REAR FLOOR MAT REAR SUPPORT PLATE
REMOVE BACK DOOR TRIM COVER LH
REMOVE BACK DOOR TRIM COVER RH
REMOVE BACK DOOR TRIM PANEL ASSEMBLY
REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
REMOVE LICENSE PLATE LIGHT ASSEMBLY
REMOVE REAR LICENSE LIGHT COVER
Back Door Garnish (W/ Tire Carrier) -- Removal |
| 1. REMOVE REAR LIGHT ASSEMBLY LH |
(Click here)
| 2. REMOVE REAR LIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 3. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Put protective tape around the back door outside garnish sub-assembly.
Text in Illustration*a
| Protective Tape
|
Detach the 6 clips and remove the back door outside garnish sub-assembly.
| 4. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE |
Detach the 6 clips and remove the rear floor mat support plate.
| 5. REMOVE BACK DOOR TRIM COVER LH |
Remove the back door trim cover LH as shown in the illustration.
| 6. REMOVE BACK DOOR TRIM COVER RH |
Remove the back door trim cover RH as shown in the illustration.
| 7. REMOVE BACK DOOR TRIM PANEL ASSEMBLY |
Remove the 4 bolts.
Detach the 16 clips and remove the back door trim panel assembly.
| 8. REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Remove the 2 nuts and disconnect the connector.
Put protective tape around the No. 2 back door outside garnish sub-assembly.
Text in Illustration*a
| Protective Tape
| -
| -
|
Detach the 8 clips.
Pull out the wire harness of the license plate light from the tail gate, and remove the No. 2 back door outside garnish sub-assembly.
| 9. REMOVE LICENSE PLATE LIGHT ASSEMBLY |
Remove the 2 screws and 2 lights.
| 10. REMOVE REAR LICENSE LIGHT COVER |
Put protective tape around the rear license light cover.
Detach the 7 claws and remove the double-sided tape to remove the rear license light cover.
Text in Illustration*a
| Protective Tape
|
*b
| Double-sided Tape
|
