Can Communication System (For Rhd) Precaution

Power Source Network. Land Cruiser. Urj200, 202 Grj200 Vdj200
Networking. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. IGNITION SWITCH EXPRESSION

  1. STEERING SYSTEM HANDLING PRECAUTIONS

  1. SRS AIRBAG SYSTEM HANDLING PRECAUTIONS

  1. BUS LINE REPAIR

  1. CONNECTOR HANDLING

Can Communication System (For Rhd) -- Precaution



1.IGNITION SWITCH EXPRESSION

HINT:
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression
Ignition Switch (position)
Engine Switch (condition)
Ignition Switch off
Off
Off (Lock)
Ignition Switch ON
ON
On (IG)
Ignition Switch ACC
ACC
On (ACC)
Engine Start
START
On (Start)

2.STEERING SYSTEM HANDLING PRECAUTIONS

  1. Care must be taken when replacing parts. Incorrect replacement could affect the performance of the steering system and result in hazards when driving.


3.SRS AIRBAG SYSTEM HANDLING PRECAUTIONS

  1. This vehicle is equipped with an SRS (Supplemental Restraint System), which includes components such as the driver airbag and front passenger airbag. Failure to carry out service operations in the correct sequence could cause unexpected SRS deployment during servicing and may lead to a serious accident. Before servicing (including installation/removal, inspection and replacement of parts), be sure to read the precautionary notice for the Supplemental Restraint System (Click here).


4.BUS LINE REPAIR


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. After repairing the bus line with solder, wrap the repaired part with vinyl tape (Click here).

    NOTICE:
    1. The CANL bus line and CANH bus line must be installed together.
    2. When installing the CAN bus lines, make sure to twist them.
    3. CAN bus lines are likely to be influenced by noise if the bus lines are not twisted together.
    4. Leave approximately 80 mm (3.15 in.) loose in the twisted wires around the connectors.


    2. Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Rhd) Precaution

  2. Do not use by-pass wiring between the connectors.

    NOTICE:
    The feature of the twisted wire harness will be lost if bypass wiring is used.
    Text in Illustration
    *1
    		By-pass Wire

5.CONNECTOR HANDLING


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Rhd) Precaution

  1. When inserting probes into a connector, insert them from the rear of the connector.

    Text in Illustration
    *1
    		Tester Probe


    2. Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Rhd) Precaution

  2. Use a repair wire to check the connector if it is impossible to check resistance from the rear of the connector.

    Text in Illustration
    *1
    		Repair Wire