Relay On-Vehicle Inspection

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200

1Vd-Ftv Starting. Land Cruiser. Urj200, 202 Grj200 Vdj200

INSPECT STARTER RELAY (ST)
INSPECT STARTER CUT RELAY (ST CUT)
INSPECT NO. 1 GLOW RELAY (GLOW 1)
INSPECT NO. 2 GLOW RELAY (GLOW 2)
INSPECT MAIN BODY ECU (ACC RELAY)

Relay -- On-Vehicle Inspection

1. INSPECT STARTER RELAY (ST)

Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Relay On-Vehicle Inspection

Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
3 - 5
Battery voltage not applied to terminals 1 and 2
10 kΩ or higher
Battery voltage applied to terminals 1 and 2
Below 1 Ω
If the result is not as specified, replace the relay.

2. INSPECT STARTER CUT RELAY (ST CUT)

Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Relay On-Vehicle Inspection

Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
3 - 5
Battery voltage not applied to terminals 1 and 2
10 kΩ or higher
Battery voltage applied to terminals 1 and 2
Below 1 Ω
If the result is not as specified, replace the relay.

3. INSPECT NO. 1 GLOW RELAY (GLOW 1)

Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Relay On-Vehicle Inspection

Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
3 - 5
Battery voltage not applied to terminals 1 and 2
10 kΩ or higher
Battery voltage applied to terminals 1 and 2
Below 1 Ω
If the result is not as specified, replace the relay.

4. INSPECT NO. 2 GLOW RELAY (GLOW 2)

Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Relay On-Vehicle Inspection

Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
3 - 5
Battery voltage not applied to terminals 1 and 2
10 kΩ or higher
Battery voltage applied to terminals 1 and 2
Below 1 Ω
If the result is not as specified, replace the relay.

5. INSPECT MAIN BODY ECU (ACC RELAY)

Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Relay On-Vehicle Inspection

Measure the resistance of the ACC relay circuit.
1. Measure the resistance according to the value(s) in the table below.
  Standard Resistance:
  Tester Connection
  Condition
  Specified Condition
  2A-1 - 2D-8
  Battery voltage not applied between 2D-45 and 2D-62
  10 kΩ or higher
  Battery voltage applied between 2D-45 and 2D-62
  Below 1 Ω
  If the result is not as specified, replace the main body ECU.