Headlight Assembly (For Led Headlight) Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT BUMPER COVER

  4. REMOVE FRONT FENDER MAIN SEAL LH

  5. REMOVE HEADLIGHT ASSEMBLY LH

Headlight Assembly (For Led Headlight) -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT BUMPER COVER
(Click here)


4. REMOVE FRONT FENDER MAIN SEAL LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a clip remover, detach the 3 clips and remove the fender main seal.



5. REMOVE HEADLIGHT ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Assembly (For Led Headlight) Removal

  1. Put protective tape around the headlight assembly LH.

    Text in Illustration
    *1
    		Protective Tape

  1. Remove the 4 bolts.

  1. Disconnect the connectors and headlight assembly LH.