Fuel Sender Gauge Assembly (For Fuel Sub Tank) Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Gr-Fe Fuel. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)

  4. REMOVE REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)

  5. REMOVE REAR NO. 2 SEAT ASSEMBLY

  6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

  7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  8. REMOVE REAR FLOOR MAT ASSEMBLY

  9. REMOVE REAR NO. 7 AIR DUCT (w/ Rear Air Conditioning System)

  10. REMOVE REAR FLOOR SERVICE HOLE COVER

  11. REMOVE FUEL SENDER GAUGE ASSEMBLY

Fuel Sender Gauge Assembly (For Fuel Sub Tank) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)
(Click here)


4. REMOVE REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)
(Click here)


5. REMOVE REAR NO. 2 SEAT ASSEMBLY
  1. for Face to Face Seat Type (Click here)
  2. except Face to Face Seat Type (Click here)


6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
  1. w/ Sliding Roof (Click here)
  2. w/o Sliding Roof (Click here)


7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH
  1. w/ Sliding Roof (Click here)
  2. w/o Sliding Roof (Click here)


8. REMOVE REAR FLOOR MAT ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear Air Conditioning System:
    Detach the 5 clips and fold back the floor mat toward the front of the vehicle.

    HINT:
    Fold back the floor mat so that the rear No. 7 air duct can be removed.

  1. w/o Rear Air Conditioning System:
    Detach the 5 clips and fold back the floor mat toward the front of the vehicle.

    HINT:
    Fold back the floor mat so that the service hole cover can be removed.


9. REMOVE REAR NO. 7 AIR DUCT (w/ Rear Air Conditioning System)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 clips and remove the air duct.



10. REMOVE REAR FLOOR SERVICE HOLE COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200


11. REMOVE FUEL SENDER GAUGE ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the sender gauge connector.

  1. Remove the 5 screws and sender gauge.

    NOTICE:
    Be careful not to bend the arm of the fuel sender gauge.

  1. Remove the gasket from the sender gauge.