Fuel Sender Gauge Assembly (For Fuel Sub Tank) Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Fuel. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY

  2. INSTALL REAR FLOOR SERVICE HOLE COVER

  3. INSTALL REAR NO. 7 AIR DUCT

  4. INSTALL REAR FLOOR MAT ASSEMBLY

  5. INSTALL REAR NO. 2 SEAT ASSEMBLY

  6. INSTALL REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)

  7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Fuel Sender Gauge Assembly (For Fuel Sub Tank) -- Installation



1. INSTALL FUEL SENDER GAUGE ASSEMBLY

  1. Install a new gasket to the fuel sender gauge assembly.

  1. Install the fuel sender gauge assembly with the 5 screws.

    Torque:
    1.5 N*m{15 kgf*cm, 13 in.*lbf}
    NOTICE:
    Be careful not to bend the arm of the fuel sender gauge assembly.

  1. Connect the fuel sender gauge connector.



2. INSTALL REAR FLOOR SERVICE HOLE COVER

  1. Install the rear floor service hole cover with new butyl tape.



3. INSTALL REAR NO. 7 AIR DUCT


    Land Cruiser. Urj200, 202 Grj200 Vdj200.3Ur-Fe Fuel.Fuel System.Fuel Sender Gauge Assembly (For Fuel Sub Tank) Installation

  1. Attach the 4 clips to install the rear No. 7air duct.

    HINT:
    Attach the clips in the order shown in the illustration.


4. INSTALL REAR FLOOR MAT ASSEMBLY

  1. Attach the 5 clips to install the rear floor mat assembly.



5. INSTALL REAR NO. 2 SEAT ASSEMBLY
  1. for Face to Face Seat Type:
    (Click here)
  2. except Face to Face Seat Type:
    (Click here)


6. INSTALL REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)
(Click here)


7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)
(Click here)


8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).