Multi-Display (W/ Navigation System) Removal
PRECAUTION
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY
REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
REMOVE MULTI-DISPLAY ASSEMBLY
REMOVE NO. 1 RADIO RECEIVER BRACKET
Multi-Display (W/ Navigation System) -- Removal |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY |
Detach the 8 claws and remove the opening cover.
| 4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY |
Place protective tape as shown in the illustration.
Text in Illustration*1
| Protective Tape
|
Using a moulding remover, detach the 6 claws.
Disconnect the connector and remove the No. 3 instrument panel register.
| 5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY |
Place protective tape as shown in the illustration.
Text in Illustration*1
| Protective Tape
|
Using a moulding remover, detach the 6 claws.
Disconnect the connector and remove the No. 4 instrument panel register.
| 6. REMOVE MULTI-DISPLAY ASSEMBLY |
Remove the 2 screws and 2 bolts.
Pull the multi-display assembly to detach the 2 clips and 6 claws on the backside of the multi-display assembly.
Disconnect the connectors and remove the multi-display assembly.
| 7. REMOVE NO. 1 RADIO RECEIVER BRACKET |
Remove the 4 bolts and No. 1 radio receiver bracket.
