Radio Antenna Cord Installation

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL NO. 4 ANTENNA CORD SUB-ASSEMBLY

  2. INSTALL FRONT FLOOR CARPET ASSEMBLY

  3. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

  4. INSTALL ROOF HEADLINING ASSEMBLY

  5. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)

  6. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)

  7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  9. CHECK SRS WARNING LIGHT

Radio Antenna Cord -- Installation



1. INSTALL NO. 4 ANTENNA CORD SUB-ASSEMBLY


  1. Attach each clamp to install the No. 4 antenna cord sub-assembly.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Radio Antenna Cord Installation

  1. Install the 2 brackets with the 2 bolts.

    Torque:
    :
    8.5 N*m{87 kgf*cm, 75 in.*lbf}

  1. Connect each connector.



2. INSTALL FRONT FLOOR CARPET ASSEMBLY

  1. Install the front floor carpet assembly (Click here).



3. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY


  1. w/o Sliding Roof:



    1. Apply new double-sided tape as shown in the illustration.

      HINT:
      Attach double-sided tape to the hatched areas shown in the illustration below.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Radio Antenna Cord Installation

    2. Align the red tape wound around the antenna cord with the V markings on the roof headlining and the notch at the rear of the headlining, and attach the antenna cord to the double-sided tape.

    3. Attach the 2 clamps and fit the antenna into the notch.

  1. w/ Sliding Roof:

    1. Apply new double-sided tape as shown in the illustration.

      HINT:
      Attach double-sided tape to the hatched areas shown in the illustration below.

      Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Radio Antenna Cord Installation

    2. Align the red tape wound around the antenna cord with the V markings on the roof headlining and the notch at the rear of the headlining, and attach the antenna cord to the double-sided tape.

    3. Attach the 4 clamps and fit the antenna into the notch.



4. INSTALL ROOF HEADLINING ASSEMBLY

  1. w/o Sliding Roof:
    Install the roof headlining (Click here).

  1. w/ Sliding Roof:
    Install the roof headlining (Click here).



5. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display)


  1. for LHD:
    Attach the 7 clamps to install the antenna cord.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Radio Antenna Cord Installation



  1. for RHD:
    Attach the 5 clamps to install the antenna cord.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Radio Antenna Cord Installation



6. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display)


  1. for LHD:
    Attach the 8 clamps to install the antenna cord.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Radio Antenna Cord Installation



  1. for RHD:
    Attach the 6 clamps to install the antenna cord.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Radio Antenna Cord Installation



7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

  1. Install the instrument panel safety pad (Click here).



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


9. CHECK SRS WARNING LIGHT

  1. Check the SRS warning light (Click here).