Luggage Speaker Removal

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

  5. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

  6. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  7. REMOVE REAR STEP COVER

  8. REMOVE REAR DOOR SCUFF PLATE RH

  9. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  10. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

  11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  12. REMOVE NO. 1 WOOFER BOX SPEAKER ASSEMBLY

Luggage Speaker -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  1. Remove the tonneau cover.



4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side (Click here).


5. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side (Click here).


6. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the support plate.



7. REMOVE REAR STEP COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.



8. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


9. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Luggage Speaker Removal
HINT:
Use the same procedure to remove the rear seat cover cap on the other side.

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.


10. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the tonneau cover holder cap on the other side.

  1. Detach the 2 claws and remove the tonneau cover holder cap.



11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and rear No. 1 seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Detach the 3 claws and remove the cover.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Remove the bolt and rear No. 2 seat belt anchor.



  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 16 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.



    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Luggage Speaker Removal



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.



    2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Luggage Speaker Removal



  1. w/ Tonneau Cover:

    1. Remove the screw and clip.



    2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Luggage Speaker Removal



12. REMOVE NO. 1 WOOFER BOX SPEAKER ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the connector.

  1. Remove the 5 bolts and box speaker.