Rear Differential Lock Control Switch (W/ Differential Lock) Removal

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 6 claws and remove the instrument side panel.

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.

Remove the 2 screws.

Detach the 3 claws.

Disconnect the connectors and remove the No. 1 instrument panel under cover.

Remove the clip.

Remove the screw.

Detach the 8 claws.

Remove the panel pad and disconnect the connectors and 2 clamps.

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 7 claws and remove the panel cushion.

Using a screwdriver, detach the 2 claws and open the hole cover.

HINT:

Tape the screwdriver tip before use.

w/ Driver Side Knee Airbag:

1. Remove the 2 bolts.
   





2. Detach the 16 claws.
   
   

   
   
   
   

w/o Driver Side Knee Airbag:

1. Remove the 2 bolts.
   





2. Detach the 9 claws.
   
   

   
   
   
   

for Automatic Air Conditioning System:

1. Detach the 2 claws and remove the room temperature sensor.
   

Detach the 2 claws and disconnect the 2 control cables.

Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.

Detach the 2 claws and remove the switch.