Headlight Leveling Switch Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

  3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  7. REMOVE NO. 1 SWITCH HOLE BASE

  8. REMOVE HEADLIGHT LEVELING SWITCH

Headlight Leveling Switch -- Removal


HINT:
  1. Use the same procedures for the RHD and LHD.
  2. The procedures listed below are the LHD side.


1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Leveling Switch Removal

  1. Place protective tape as shown in the illustration.

  1. Using a moulding remover, detach the 7 claws and remove the panel cushion.



2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the clip.

  1. Remove the screw.

  1. Detach the 8 claws.

  1. Remove the panel pad and disconnect the connectors and 2 clamps.



3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Leveling Switch Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.



4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. Place protective tape as shown in the illustration.



  1. Using a moulding remover, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Leveling Switch Removal


    Text in Illustration
    *A
    		w/ Entry and Start System
    		*B
    		w/o Entry and Start System
    *1
    		Protective Tape
    		-
    		-


5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws.

  1. Detach the 3 claws.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover.



6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Leveling Switch Removal

  1. Using a screwdriver, detach the 2 claws and open the hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


  1. w/ Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 16 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Leveling Switch Removal



  1. w/o Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 9 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Leveling Switch Removal



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for Automatic Air Conditioning System:

    1. Detach the 2 claws and remove the room temperature sensor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and disconnect the 2 control cables.

  1. Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.



7. REMOVE NO. 1 SWITCH HOLE BASE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws.

  1. Disconnect the connectors and remove the No. 1 switch hole cover.



8. REMOVE HEADLIGHT LEVELING SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the switch.