Curtain Shield Airbag Cutoff Switch Installation

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Supplemental Restraint Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL CURTAIN SHIELD AIRBAG CUTOFF SWITCH

  2. INSTALL NO. 1 SWITCH HOLE BASE

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

  8. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  10. CHECK SRS WARNING LIGHT

Curtain Shield Airbag Cutoff Switch -- Installation


HINT:
  1. Use the same procedures for the RH and LH.
  2. The procedures listed below are the LH side.


1. INSTALL CURTAIN SHIELD AIRBAG CUTOFF SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the switch.



2. INSTALL NO. 1 SWITCH HOLE BASE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connectors.

  1. Attach the 4 claws to install the No. 1 switch hole base.



3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  1. Connect the connectors.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for Automatic Air Conditioning System:

    1. Attach the 2 claws to install the room temperature sensor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to connect the 2 control cables.



  1. w/ Driver Side Knee Airbag:

    1. Attach the 16 claws to install the lower No. 1 instrument panel finish panel.



    2. Install the 2 bolts.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Installation



  1. w/o Driver Side Knee Airbag:

    1. Attach the 9 claws to install the lower No. 1 instrument panel finish panel.



    2. Install the 2 bolts.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Installation



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to close the hole cover.



4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connectors.

  1. Attach the 3 claws to install the No. 1 instrument panel under cover.

  1. Install the 2 screws.



5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


  1. Attach the 2 claws to install the No. 2 instrument cluster finish panel garnish.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Installation


    Text in Illustration
    *A
    		w/ Entry and Start System
    		*B
    		w/o Entry and Start System


6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the No. 1 instrument cluster finish panel garnish.



7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connectors and attach the 2 clamps.

  1. Attach the 8 claws to install the lower instrument panel pad sub-assembly.

  1. Install the clip and screw.



8. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.



9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


10. CHECK SRS WARNING LIGHT

  1. Check the SRS warning light (Click here).