Turbo Motor Driver Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Intake Exhaust. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL TURBO MOTOR DRIVER

  2. INSTALL FRONT FENDER LINER RH

  3. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Turbo Motor Driver -- Installation



1. INSTALL TURBO MOTOR DRIVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Intake Exhaust.Intake System.Turbo Motor Driver Installation

  1. Insert the bracket tab into the slot labeled A and insert the 2 stud bolts into the bracket as shown in illustration.

    NOTICE:
    If the turbo motor driver has been struck or dropped, replace it.

  1. Install the 2 nuts and bolt.

    Torque:
    20 N*m{199 kgf*cm, 14 ft.*lbf}


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connector. Then move the lock lever as shown in the illustration to lock the connector.



2. INSTALL FRONT FENDER LINER RH

  1. Install the fender liner with the 5 clips.

  1. Using a T30 "TORX" socket, install the 3 screws.

  1. Connect the liner to the front bumper cover with the screw.



3. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

  1. Install the front fender splash shield RH with the clip, and then install the 3 bolts and 2 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).